Blaupunkt BRISTOL CD36 Operating Instructions Manual page 20

To stop scanning,
➮
briefly press the MENU button 7.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time.
G
For further details, please read the
section entitled "Setting the scan-
ning time" in the "Radio mode"
chapter.
➮
Press button 3
"PAUSE" appears in the display.
➮
Press button 3
is activated.
Playback is resumed.
;.
; whilst pause
To display the clock time briefly,
➮
press and hold down the SRC
button = until the clock time ap-
pears in the display.
To set the clock time,
➮
press the MENU button 7.
➮
Press the or
peatedly until "CLOCK SET" ap-
pears in the display.
➮
button 8.
Press the
The clock time appears in the display.
The hours flash and can be adjusted.
➮
Adjust the hours using the
buttons 8.
Once the hours are set,
➮
button 8.
press the
The minutes flash.
➮
Adjust the minutes using the
buttons 8.
➮
Press the MENU button 7 twice.
➮
Press the MENU button 7.
"MENU" appears in the display.
➮
Press the or
peatedly until "24 H MODE" or "12
H MODE" appears in the display.
➮
Press the or
switch between the modes.
button 8 re-
button 8 re-
button 8 to
43