Cd Mode: - Blaupunkt BRISTOL CD36 Operating Instructions Manual

➮
Press the 5 MIX button ; again.
"MIX OFF" appears briefly in the dis-
play and the MIX symbol disappears.
You can scan (briefly play) all the tracks
on the CD.
➮
Press and hold down the MENU
button 7 for longer than two sec-
onds.
The next track will then be scanned.
Note:
You can set the scanning time.
G
For further details, please read the
section entitled "Setting the scan-
ning time" in the "Radio mode"
chapter.
➮
To cancel scanning, press the
MENU button 7.
The currently scanned track will then
continue to be played normally.
If you want to repeat a track,
➮
press the 4 RPT button ;.
"RPT TRCK" appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
If you want to cancel the repeat func-
tion,
➮
press the 4 RPT button ; again.
40
"RPT OFF" appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
➮
Press button 3
"PAUSE" appears in the display.
➮
Press button 3
is activated.
Playback is resumed.
You can choose between two display
types for CD mode:
Track number and clock time
G
Track number and playing time
G
➮
Press the MENU button 7.
➮
Press the or
peatedly until "CD DISP" appears
in the display.
➮
Press the or
switch between "PLAY TIME" and
"CLOCK".
➮
Press the MENU button 7 twice.
If you wish to receive traffic announce-
ments whilst CD mode is activated,
➮
press the TRAF RDS button :.
Traffic announcement priority is active
when the traffic jam symbol is shown
in the display. For further details, please
read the "Traffic information reception"
chapter.
;.
; whilst pause
button 8 re-
button 8 to