Table of Contents
Advertisement
Figure 4
Attaching the DIN Rail Bracket for horizontal mounting
2.
Attach the DIN mounting bracket (1) to the router using the two screws provided in the kit (2). Position the bracket
over the two mounting holes (3) that correspond to your orientation. Then use 13-15 in-lbs pounds of torque to
screw the bracket onto the router.
3.
Once the bracket is attached to the router, it can be mounted onto the DIN Rail.
Attaching the Bracket onto the DIN Rail
To attach the Cisco IR807 with the bracket to a DIN rail, follow these steps. Refer to
33
Figure 5
for details.
Advertisement
Table of Contents
