Advertisement
4
Setting the speed switch
4.1
Make sure that all expansion unit speed switches are set to the correct
position for your application.
For example, if connecting to an N3700 storage system, the speed switch
must be set to the 1Gb position. If connecting to an N5000 series or an
N7000 series storage system, the speed switch must be set to the 2Gb
position.
Use the following diagram for reference:
Shelf ID - close-up view
Out port activity LED
Mute button
Shelf ID
In port
In port activity LED
Gb switch
(set to 1 Gb)
1Gb
2Gb
Out port
Fault LED
Speed (2 Gb) LED
7
Advertisement
