Table of Contents
Advertisement
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Loading tape
1
Press TAPE to select TAPE
mode.
➜
"TAPE" is displayed.
2
Press 70 to open the tape
deck door.
3
Load the tape with the open side downward and
full spool to the left.
4
Close the tape deck door.
Tape Operation /Recording
CD1
CD2
CD3
Playing tapes
To playback a selected tape deck
●
PressÉ on tape deck 1 or 2.
➜
The tape will stop at the end of playback.
Continuous playback of two tapes
1
Load the tapes in tape deck 1 and 2.
2
PressÉ on tape deck 2.
3
Press Å on tape deck 1, followed byÉ .
➜
Playback will begin from tape deck 2 and
continue with tape deck 1. It will stop at the end
of tape deck 1.
To interrupt playback
●
Press Å .
●
To resume playback, press Å again.
To stop playback
●
Press 70.
21
Advertisement
Table of Contents
