Erasing The Programme - Philips FWM15/21M User Manual

CD/MP3-CD Operations
5
Press í or ë repeatedly to select the desired
track.
●
For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
6
Press PROG to store the track.
●
Repeat steps 5–6 to store other tracks.
7
To end programming, press Ç once.
➜
stays and the programme mode
PROG
remains active.
➜
The total number of tracks programmed and
the total playing time are displayed.
➜
For MP3 disc, total playing time will not be
shown.
8
To start programme play, pressÉ Å .
➜ "PLAY PROGRAM" is displayed.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than " 99:59 "
then " --:-- " is displayed instead of the total
playing time.
– If you attempt to programme more than 99
tracks, "FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
To review the programme
●
Stop playback and pressí or ë repeatedly.
●
To exit review mode, press Ç.
18

Erasing the programme

●
Press Ç once when playback is stopped or
twice during playback.
➜ disappears and "PROGRAM CLEARED"
PROG
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to "Tape
Operation/Recording".