Different Play Modes: Shuffle And Repeat; Programming Track Numbers; Reviewing The Programme; Erasing The Programme - Philips FWC143/12 User Manual

Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
REPEAT ............ plays the current track
continuously
REPEAT ALL ... repeats the entire disc/
programme
SHUF ................ tracks of the entire disc are
played in random order
SHUF and REPEAT ALL
disc/programme continuously in
random order
1
To select your play mode, press SHUFFLE or
REPEAT on the remote control before or
during playback until the display shows the
desired function.
Press 2; to start playback if in the STOP
2
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press SHUFFLE
or REPEAT on the remote control until the
various SHUFFLE/ REPEAT modes are no longer
displayed.
● You can also press STOP 9 to cancel your play
mode.
repeats the entire
CD Operation

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1
Press PROGRAM (PROG on the remote) to
enter the programming mode.
Use SEARCH ¡1/2™ (¡/™ on remote) to
2
select your desired track number.
➜ The selected track number and
the display panel.
3
Press PROGRAM (PROG on the remote
control) to confirm the track number to be
stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
5
To start playback of your disc programme, press
2;.
Note:
– If you wish, you can add further tracks to your
current program. Make sure you are in the STOP
position, and that you have not exceeded 20
tracks.

Erasing the programme

You can erase the programme by:
● pressing STOP 9 once in the STOP mode;
● pressing STOP 9 twice during playback;
● opening the CD compartment;
● selecting another sound source
➜
disappears from the display.
PROG
flash on
PROG
13