Find The Tv Input Channel; Select Menu Display Language; Turn On Progressive Scan; Play - Philips HTP3520K/98 User Manual

Find the TV input channel

1
Press to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).

Select menu display language

1
Press SETUP.
» [General Setup] menu is displayed.
2
Select [OSD Language], and then press .
3
Press to select a language, and then press
OK.

Turn on progressive scan

Note
To use the progressive scan feature, you must connect a
progressive scan TV with the component video jacks (see
"Connect" > "Connect audio/video cables" > "Option 1:
Connect to the component video jacks" for details).
1
Turn on the TV to the correct video input
channel for this product.
2
Press SETUP.
3
Press to select [Video Setup].
8 EN
4
Select [Progressive] > [On], and then press
OK.
»
A warning message is displayed.
5
To proceed, select [Ok] and then press OK.
»
The progressive setup is complete.
Note
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button '1'.
6
Press SETUP to exit the menu.
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.

5 Play

Play a disc

Caution
Do not place any objects other than discs into the disc
compartment.
Do not touch the disc optical lens inside the disc
compartment.
1
Press to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press to close the disc compartment and
start disc play.
Note
Check the types of discs supported (see "Your DVD
player" > "Playable media").
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preferences" > [Parental
Control]).