Table of Contents
Advertisement
Option 2: Connect to the video (CVBS)
jack
VIDEO IN
1
Connect a composite video cable (supplied) to:
the TV OUT jack on this product.
the video input jack on the TV.
2
Connect the audio cables (supplied) to:
the AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.
Optional audio connections
Connect the audio from this product to other devices
to enhance sound.
DIG I T A L
OU T
C O A X I A L
1
Connect a coaxial cable (not supplied) to:
the COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
DIG I T A L IN
AUDIO IN
1
Connect the audio cables (supplied) to:
the AUDIO OUT L/R jacks on this
product.
the audio input jacks on the device.
Connect power
Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
The type plate is located on the back of the product.
1
Connect the AC power cable to:
this product.
the wall socket.
»
This product is ready to be set up for use.
4 Get started
Prepare the remote control
1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
Note
If you are not going to use the remote control for a long
time, remove the batteries.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Batteries contain chemical substances, so they should be
disposed of properly.
EN
7
Advertisement
Table of Contents
