Other Features; Karaoke; Adjust Settings; General Setup - Philips HTP3520K/98 User Manual

6 Other features

Karaoke

You can connect a microphone (not supplied) to sing
along with a music source.
Note
Before you connect a microphone, set the microphone
volume to the minimum to prevent howling.
1
Turn on the TV, and select the TV input
channel.
2
Connect a microphone to the MIC jack on this
product.
3
Turn on the microphone sound output (see
"Adjust Karaoke settings").
4
Play a Karaoke disc and sing through the
microphone.
Adjust Karaoke settings
Note
You need to turn on the microphone sound output in
the [Microphone] option to activate karaoke-related
menu options.
1
Press KARAOKE.
»
The karaoke settings menu is displayed.
2
Select an option, and then press OK.
3
Change or set a setting, and then press OK.
4
Press KARAOKE again to exit the menu.
[Microphone] - Turn on or off the microphone
sound output.
[MIC Volume] - Adjust the microphone volume.
[Echo] - Adjust the echo level.
[Karaoke Scoring] - Turn off the function of
Karaoke scoring or select a scoring level (basic/
intermediate/advance). If a level is selected, the
score is displayed after each song ends.
[Karaoke Idol] - Song contest among 4 singers.
12 EN
1) In the [Karaoke Scoring] option, select a level
(basic/intermediate/advance).
2) In the [Karaoke Idol] option, turn on the
contest.
»
The song selection menu is displayed.
3) Input a track (VCD/SVCD) or a title/chapter
selected.
4) Then select [Start], and press OK to start play
selected songs.
»
After all the selected songs end, a contest
result is displayed.
[Key Shift] - Adjust the pitch level that matches
your voice.
[Vocal] - Select various Karaoke audio modes, or
turn off original vocal.

7 Adjust settings

Note
If the setup option is grayed out, it means the setting
cannot be changed at the current state.

General setup

1
Press SETUP.
» [General Setup] menu is displayed.
2
Press to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.