Component Identification - Graco e-Xtreme Driver Instructions Manual

Component Identification

Component Identification
Component Component
Ref. Description
Ref. Ref. Description Description
A Driver
B* Fused Safety Switch (not shown)
C Lift Ring
G Oil Drain Plug
H Driver Output Shaft
K Oil Sight Glass
L
Status Indicator Light (LED)
N Pressure Control Knob
P** Oil Fill Cap (vented)
S Power Switch (Lock-out tag-out equipped)
Y Electrical Junction Box
X Conduit Entry
Z Electrical Junction Box Cover
ZZ Ground Screws
* The driver requires a dedicated circuit protected by a circuit breaker or fused safety switch. See Driver
Installation manual for details.
** The driver ships pre-filled with oil from the factory. The temporary unvented cap is for shipping purposes
only and must be replaced with the supplied vented cap before use.
6
Identification
Identification
3A5124B