Warnings - Graco e-Xtreme Driver Instructions Manual

Electric driver for application of finishing materials and protective coatings using sprayers, for professional use only
Table of Contents

Advertisement

Warnings

Warnings
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
FIRE
FIRE AND
FIRE
AND EXPLOSION
AND
Flammable fumes, such as solvent and paint fumes, in work
or solvent flowing through the equipment can cause static sparking. To help prevent fire and
explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding
• Never spray or flush solvent at high pressure.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless
they are anti-static or conductive.
• Stop
Stop operation
Stop
operation immediately
operation
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
Static charge may build up on plastic parts during cleaning and could discharge and ignite
flammable vapors. To help prevent fire and explosion:
• Clean plastic parts only in well ventilated area.
• Do not clean with a dry cloth.
• Do not operate electrostatic guns in equipment work area.
SPECIAL CONDITIONS
SPECIAL
SPECIAL
• To prevent the risk of electrostatic sparking, the equipment's non-metallic parts should be
cleaned only with a damp cloth.
• The aluminum housing may spark upon impact or contact with moving parts, which may
cause fire or explosion. Take precautions to avoid such impact or contact.
• All flameproof joints are critical to the integrity of the driver as approved for hazardous
locations and are not repairable if damaged. Damaged parts must be replaced only with
genuine Graco parts with no substitutions.
3A5124B
WARNING
WARNING
WARNING
EXPLOSION HAZARD
EXPLOSION
HAZARD
HAZARD
immediately if static sparking occurs or you feel a shock. Do not use
immediately
CONDITIONS FOR
FOR SAFE
SAFE USE
CONDITIONS
FOR
SAFE
work area
work
Grounding instructions.
Grounding
USE
USE
area can ignite or explode. Paint
area
Warnings
3

Advertisement

Table of Contents
loading

Table of Contents