Using Five Invalid Passwords - Western Digital My Book User Manual

▪ If you have WD Discovery installed and open, you can run WD Drive Utilities
by going to the Apps tab, finding the application and clicking
▪ Otherwise, you can run an application from the Windows Start menu by
clicking
Start > All Programs > WD Discovery > More WD Apps > WD Drive Utilities
or
Start > All Programs > WD Apps > WD Drive Utilities
2. If you have more than one supported device connected to your computer,
select the one that you want to erase.
3. On the WD Drive Utilities screen, click
dialog:
4. On the drive erase dialog:
a. If you want to change the volume name, type over the name in the Volume
Name box.
b. Read the explanation of the loss of data if you erase your drive. If you want
to save any of the data that is on the drive, back it up to another device
before continuing with the drive erase.
c. Click the
I understand...
activate the Erase Drive button.
d. Click
Erase Drive
Go to http:/ /support.wdc.com
information about downloading and restoring the WD software on your
drive.
Note: Erasing your drive also removes your password. If you used a password to
protect your drive, you will need to re-create it after restoring the WD software
and disk image. (See

Using Five Invalid Passwords

When you have forgotten or lost your password, you can erase the drive by entering five
invalid passwords on the Unlock Drive dialog. See
With the WD Security or WD Drive Utilities
1. On the Unlock Drive dialog, make five attempts to unlock the drive by:
My Book
User Manual
Drive Erase
check box to signify that you accept the risk and
.
and see Knowledge Base Answer ID 7 for
Password Protecting the
Software.
Managing and Customizing the Drive
.
Open
.
to display the drive erase
Drive.)
24