Replacing Starter Rope - Echo CS-600 Service Manual

10

2-2 Replacing starter rope

C
4K287
D
D
STARTER SYSTEM
B
A
1. Pull out and untie knot (A).
2. Pull knot (B) to remove rope from rope reel (C).
3. When installing a new starter rope, singe both
ends of the rope to prevent fraying.
4. Make a knot (D) at end of starter rope and pass
the rope through hole of rope reel, then press the
knot (D) into recess as shown.
D
5. Pass the other end of starter rope through
rope guide on starter case, then pass starter rope
through starter grip and make a knot as shown.
6. Tighten knot. Push knot into recess of starter
grip.
CS-600