Replacing Starter Rope - Echo CS-2510TES Service Manual

CS-2510TES
250Ts, 250TCs

2-2 Replacing starter rope

C
B
4K287
D
C
E
F
STARTER SYSTEM
A
D
C
1. Pull out and untie knot (A).
2. Pull knot (B) to remove rope from rope reel (C).
3. When installing a new starter rope, singe both
ends of the rope to prevent fraying.
4. Make a knot (D) at end of starter rope and pass
the rope through hole of rope reel (C), then press
the knot (D) into recess as shown.
5. Pass the other end of starter rope through start-
er case, from inside to outside.
6. Pass starter rope through starter grip (E). Make
a knot as shown.
7. Tighten knot (F). Push the knot (F) into recess of
starter grip (E).
9