Table of Contents
Advertisement
Moving a Device
1 Select a device and choose Edit.
The 'Modify a Device' screen will appear.
2 Choose Name/Room.
The 'Modify Device Assignment' screen will
appear.
3 In the Room list, select the room to
which you want to reassign the device
to.
Note If you want, you can optionally also rename the device.
4 Choose OK.
The RC9800i will display the 'Set Up A/V Devices' screen. The device is now
reassigned to the room you selected.
Changing the remote control codes of a device
1 On the screen 'Set Up A/V Devices', select a device and choose Edit.
The 'Modify a Device' screen will appear.
2 Choose IR Codeset.
The 'Codes Setup' screen will appear.
The screen displays 3 possibilities to change your IR settings:
If some of your buttons don't work and/or you want to learn/replace codes, use the
Try & Learn method. To do so, please perform steps 3 - 4 as described in 'Learn &
Match' beginning on page 21.
If you want to assign codes to user-defined buttons yourself, use the User buttons
method. To do so, take the following steps:
1
2
3
If you want to choose a different codeset, use the Select & Try method. To do so,
perform the steps described in 'Select & Try' beginning on page 23.
User Manual
45
Choose User buttons.
The 'Try & Learn - User Defined Buttons' screen will appear.
Note All functions are red, since they are all unknown to the device.
Select a function.
The selected function will be highlighted.
Choose Learn.
Learn the function from your device's original remote control.
Note To test the function and see if the device reacts, choose Try.
Adjusting the Settings
Advertisement
Table of Contents
