Package Contents; Cutting Capacity - DeWalt D28730 Instructions Manual

ENGLISH
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data). The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Voltage Drops
Inrush currents cause short-time voltage drops. Under
unfavourable power supply conditions, other equipment may
be affected.
If the system impedance of the power supply is lower than
0.11 Ω, disturbances are unlikely to occur.
Power Supply
Be sure your power supply agrees with the nameplate marking.
A voltage decrease of more than 10% will cause a loss of power
and overheating.

Package Contents

The package contains:
1 Chop saw
1 Hex key
1 Wheel
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Bore diameter.
Date Code Position (Fig. A)
The date code 18 , which also includes the year of manufacture,
is printed into the housing.
8
Example:
Description (Fig. A, E)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Lock pin
1
Spark deflector screw
2
Spark deflector
3
2
; the
Base
4
Fence
5
Vise
6
8 mm Hex key
7
8 Crank
Vise lever
9
Wheel
10
Guard
11
Spindle lock
12
Fence bolts
13
Trigger switch
14
Padlock hole
15
Mounting holes
16
Operating handle
17
Date code
18
Intended Use
Your D28730 chop saw has been designed for the cutting of
variously shaped steel materials.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
The D28730 chop saw is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this
tool.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.

CUTTING CAPACITY

The wide vise opening and high pivot point provide cutting
capacity for many large pieces. Use the cutting capacity chart
to determine total maximum size of cuts that can be made with
a new wheel.
CAUTION: CERTAIN LARGE, CIRCULAR OR
IRREGULARLY SHAPED OBJECTS MAY REQUIRE
ADDITIONAL HOLDING MEANS IF THEY CANNOT BE
HELD SECURELY IN VISE.
CAUTION: DO NOT CUT MAGNESIUM WITH THIS
TOOL.
2018 XX XX
Year of Manufacture