Definitions: Safety Guidelines; Save All Warnings And Instructions For Future Reference - DeWalt D28730 Instructions Manual

ENGLISH
CHOP SAW
D28730
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Power input
Frequency
No-load speed
Wheel diameter
Wheel thickness
Thread size of the spindle
Bore diameter
Weight
Noise values values (triax vector sum) according to EN62841 -3-1:
L (emission sound pressure level)
PA
K (sound pressure uncertainty)
PA
L (sound power level)
WA
K (sound power uncertainty)
WA
The noise emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declarednoise emission level represents
the main applications of the tool. However if the tool is
used for different applications, with different accessories
or poorly maintained, the noise emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
4
WALT one of the
E
Technical Data
V 230
AC
W 2300
Hz 50
/min 4000
mm 355
mm 3,0
M10
mm 25,4
kg 15,5
dB(A) 92
dB(A) 2
dB(A) 105.2 105.2
dB(A) 2
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury, read the
instruction manual.
EC declaration of conformity
92
2
2
DEWALT declares that these products described under "technical
data" are in compliance with: 2006/42/EC, EN 62841-1:2015,
EN 62841-3-10:2015
These products also comply with Directive 2014/30/EU and 2011/65/EU.
For more information, please contact DEWALT at the following address
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical fi le
and makes this declaration on behalf of DEWALT.
General Power Tool Safety Warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
MACHINERY DIRECTIVE
D28730 Chop Saw
Director Engineering
Richard-Klinger-Straße 11,
Markus Rompel
DEWALT,
D-65510, Idstein,
Germany
25.04.2018