Span Powered Xdsl Connections; Bonding (Safety) Ground, Power And Frame Ground, Alarm, And Optional Fan Inputs - ADC HiGain HMS-318 List 3 User Manual

Chapter 2: Installation
DSX and HDSL Connector Procedure
Step
1 Complete one of the following steps to make the DSX-1 and HDSLx connections to the shelf using one of
the following methods: Plug the DSX-1 interface cables into P1 and P2 and the HDSLx interface cables
into P3 and P4. Wire-wrap the DSX-1 and HDSLx inputs to the appropriate individual card slots. Pin
assignments are listed in
Note:
pin assignments are listed in
PIC cable color codes are listed in
2 Continue to "Bonding (Safety) Ground, Power and Frame Ground, Alarm, and Optional Fan Inputs" on
page 2-9.
S P DSL C
PAN OWERED X
Perform the following procedure to connect the Span Powered xDSL interface cables to connectors P1, P2, P3 and
P4 (see Figure 1-2 on page 1-3
318 List 3 Shelf" on page 1-10
Before making any Span Powered xDSL connections to the HMS-318 List 3 shelf, ensure that the
DANGER
Main CO power breaker is off. Otherwise, severe injury to the installer or damage to the unit may
result.
Span Powered xDSL Connector Procedure
Step
1 Complete one of the following steps to make the Span Powered xDSL connections to the shelf using one
of the following methods:
• Plug the Span Powered xDSL interface cables into P1, P2, P3 and P4.
• Wire-wrap the Span Powered xDSL inputs to the appropriate individual card slots. Pin assignments
are listed in
Note:
pin assignments are listed in
Standard PIC cable color codes are listed in
page
2 Continue to "Bonding (Safety) Ground, Power and Frame Ground, Alarm, and Optional Fan Inputs" on
page 2-9.
2-8
Appendix A: "Signal and Pin Assignments" on page
See Figure 1-2 on page 1-3
Appendix A: "Signal and Pin Assignments" on page
ONNECTIONS
for connector location and
for connector descriptions).
Appendix A: "Signal and Pin Assignments" on page
See Figure 1-2 on page 1-3
Appendix A: "Signal and Pin Assignments" on page
B-1.
Action
for the location of the HDSLx Span connectors. HDSLx Span
Appendix B: "Standard PIC Color Code" on page
"Connecting Span Powered xDSL Circuits to the HMS-
Action
A-1.
for the location of the HDSL Span connectors. HDSL Span
Appendix B: "Standard PIC Color Code" on
December 20, 2004
A-1.
A-1. Standard
B-1.
A-1.
LTPH-UM-1261-01