Technical Data - DeWalt D27111 Original Instructions Manual

E N G L I S H
TABLE TOP MITRE SAW
D27111/D27112
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
Type
Power input
Power output
Max. blade speed
Blade diameter
Blade bore
Blade body thickness
Riving knife thickness
Riving knife hardness
Blade stopping time
Weight
Cutting capacities
Mitre saw mode
Mitre (max. positions)
Bevel (max. positions)
Maximum cross-cut
capacity at 90°/90°
Max. width of cut at 45° mitre at
max. height 90 mm
Max. width of cut at 45° bevel at
max. height 50 mm
Saw bench mode
Max. depth of cut
L (sound pressure)
PA
K (sound pressure uncertainty K)
PA
L (sound power)
WA
K (sound power uncertainty K)
WA
Vibration total values (triax vector sum) determined according to
EN 61029-1, EN 61029-2-11:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
30
WALT one of the most reliable
E
D27111 D27112
V 230 230
2 2
W 1500 1600
W 1,100 933
-1
min 2950 3300
mm 305 305
mm 30 30
mm 1.8 1.8
mm 2 2
43 ± 5 43 ± 5
s < 10.0 < 10.0
kg 26.5 24
left 50° 50°
right 60° 60°
left 48° 48°
right 0° 0°
mm 220 x 90 285 x 90 285 x 90
mm 155 201
mm 220 285
mm 0-51 0-51
dB(A) 95.0 97.0
dB(A) 3.1 2.9
dB(A) 107.0 109.0
dB(A) 3.0 3.1
m/s² 1.3 1.3
m/s² 1.5 1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
D27112-LX patterns.
115
Fuses
2 Europe
1600 U.K. & Ireland
869 U.K. & Ireland
3300
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.32 Ω at the
305
interface point (power service box) of user's supply.
30
The user has to ensure that this device is connected only to a power system
1.8
which fulfils the requirement above. If necessary, the user can ask the public
2
power supply company for the system impedance at the interface point.
43 ± 5
Defi nitions: Safety Guidelines
< 10.0
24
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
50°
not avoided, may result in minor or moderate injury.
60°
NOTICE: Indicates a practice not related to personal injury
48°
which, if not avoided, may result in property damage.
0°
Denotes risk of electric shock.
Denotes risk of fire.
201
EC-Declaration of Conformity
285
MACHINERY DIRECTIVE
0-51
D27111/D27112
D WALT declares that these products described under Technical Data are
E
in compliance with:
97.0
2006/42/EC, EN 61029-1, EN 61029-2-11.
2.9
These products also comply with Directive 2004/108/EC and 2011/65/EU.
109.0
For more information, please contact D
3.0
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
1.3
1.5
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.01.2012
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WALT at the following address or
E
WALT.
E