JVC KD-SH1000 Instructions Manual page 17

Storing your own sound modes
1
Select a sound mode.
2
Select a frequency band.
3
Adjust the enhanced level for the
selected frequency band.
4
Repeat steps 2 and 3 to adjust the
other frequency bands.
5
6
Select one of the user modes.
7
Store the adjustments.
Adjusting Parametric EQ
1
Enter the EQ menu (see page 4).
2
3
Select a band.
Band1 : 20.0 Hz – 1.2 kHz
Band2 : 80.0 Hz – 5.0 kHz
Band3 : 315.0 Hz – 20 kHz
4
Adjust the enhanced level for the
selected band.
5
Select the frequency.
• Band 1/2/3 are required to be preset at
least 5 steps (frequencies) away from each
other. (Only selectable frequencies are
shown on the display.)
6
Select the band width (Q).
• To adjust the other bands, press BACK.
Then repeat steps 3 to 6.
7
Finish the procedure.
Once you have made adjustments, it is
memorized. The memorized setting is recalled
next time you select Parametric EQ.
17