Table of Contents
Advertisement
7.
Configure file transfer type.
Enter:
AT#FTPTYPE=#
where # is 0 for binary or 1 for ASCII.
8.
Enter the file name to be sent to the FTP server and initiate connection.
Enter:
AT#FTPPUT="file.txt"
The device responds with:
CONNECT
9.
Send the file through the device.
Closing the FTP Data Connection
When you finish sending the file:
1.
Enter the escape sequence.
Enter:
+++
The device responds with:
NO CARRIER
2.
Close the FTP connection.
Enter:
AT#FTPCLOSE
3.
Close the PPP data connection.
Enter:
AT#SGACT=1,0
The device responds with OK.
Downloading File from FTP Server
To connect to an FTP server and download files:
1.
Check signal strength.
Enter:
AT+CSQ
2.
If using a SIM card, configure the APN.
Enter:
AT+CGDCONT=1,IP,"XXX.APN.com"
where XXX.APN.com is the APN your cellular provider assigned to your SIM card.
3.
Verify device is registered on the cellular network.
Enter:
AT+CREG?
Should return:
4.
Activate context one
Enter:
AT#SGACT=1,1
®
MultiConnect
Cell MTC-G3 User Guide
CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
31
Advertisement
Table of Contents
