Table of Contents
Advertisement
As the power burner is designed for larger cookware, it is recommended that the product is mounted 6-12" below the countertop. Sufficient space should also be left around the product for safe
cookware handling.
RECESSED CUTOUT
F
G
a
c
CAVITY DIMENSIONS
A Height of cutout
B Depth of cutout
C Width of cutout
D Depth of gas supply opening
E Width of gas supply opening
F Height of countertop recess
G Minimum distance from countertop recess to cutout
Notes:
•
When determining a suitable location, take into account concerns such as exposure to wind, proximity to traffic paths,
and keeping any gas supply lines as short as possible.
•
Locate the unit in a well-ventilated area.
•
The counter and supporting ledges or deck must be level and flat.
•
The enclosure should have ventilation holes to prevent gas build-up in the event of a leak. Refer to ANSI Z21.58
Standard for Outdoor Cooking Gas Appliances, Section 1.7 Enclosures For Self Contained LP-Gas Supply Systems.
5
b
e
d
ventilation
PBE1 MODELS
INCHES
10 1/8
22 3/4
22 1/2
4
4 15/16
6-12
3
BUILT-IN CONSTRUCTION
If the unit is to be placed into a combustible enclosure, an insulated jacket is required.
CUTOUT DIMENSIONS
MM
257
A Height of cutout
578
B Depth of cutout
572
C Width of cutout
102
D Depth of gas supply opening
125
E Width of gas supply opening
152 - 305
F Depth to gas supply opening from front of cutout
76
G Width to gas supply opening from side of cutout
H Height of countertop recess
I Minimum distance from countertop recess to cutout
Notes:
•
To purchase access doors and drawers, visit dcsappliances.com
•
24" access doors model number: ADN1-20x24
•
24" access drawers model number: ADR2-20x24
RECESSED INSULATED JACKET CUTOUT
b
H
I
a
e
c
g
d
f
ventilation
PBE1 MODELS
INCHES
MM
11 1/8
283
23 3/4
603
28 7/8
734
4
102
4
102
18 1/2
470
3 1/2
89
6-12
152 - 305
18
457
Advertisement
Table of Contents
