Ms2122 Design Specifications - Metrologic MS2122 StratosE Installation And User Manual

Hide thumbs Also See for MS2122 StratosE:
Table of Contents

Advertisement

I
NTRODUCTION
MS2122 D
S
ESIGN
PECIFICATIONS
Operational
Light Source:
Peak Laser Power:
Horizontal Depth of Field:
Vertical Depth of Field:
Scan Speed:
No. of Scan Lines:
Motor Speed:
Min Bar Width:
Decode Capability:
System Interfaces:
Print Contrast:
No. Characters Read:
Beeper Operation:
Indicators (LED):
Mechanical
Length:
Width (below counter):
Depth (below counter):
Height (above counter):
Weight (with platter):
Electrical
Voltage Supply:
Operating Power:
Standby Power:
Operating Current:
Standby Current:
DC Transformers:
For Regulatory Compliance Information refer to pages 43 - 45.
Environmental
Operating Temperature:
IP Rating:
Storage Temperature:
Humidity:
Contaminants:
Ventilation:
Specifications subject to change without notice.
VLD 650 nm
<2.2 mW
0 mm - 152 mm (0"- 6") for 0.33 mm (13 mil) bar code
0 mm - 216 mm (0"- 8.5") for 0.33 mm (13 mil) bar code
6000 scans lines per second
68 (40 horizontal / 28 vertical)
4800 / 6000 RPM
0.152 mm (6.0 mil)
All standard 1-D bar codes RSS-14, RSS-Expanded, and RSS-14 Limited
RS232, Aux RS232, IBM468x/469x, USB (low speed and full speed), OCIA
35% minimum reflectance difference
up to 80 data characters (Maximum number will vary based on symbology and density)
7 tones or no beep; 3 volume settings
Blue = laser on, ready to scan; White = good read, decoding
MS2122 - 400 mm (15.75")
MS2122 - 292 mm (11.5")
100 mm (3.9")
181 mm (7.1")
MS2122 - 6.93 Kg (15.25 lbs.)
1.5A @ +5V / 1.5A @ +12V
14.25 Watts
3.25 Watts
1A @ 5V / .75A @ 12V
.44A @ 5V / .08A @ 12V
Class II; 5VDC @ 1.5A; 12 VDC @ 1.5A
0°C to 40°C (32°F to 104°F)
IP 55
-40°C to 60°C (-40°F to 140°F)
5% to 95% relative humidity, non-condensing
Sealed to resist airborne particulate contaminants
None required
Design Specifications
5

Advertisement

Table of Contents
loading

Table of Contents