Linksys RE9000 Manual page 4

Hide thumbs Also See for RE9000:

Accessing the Linksys RE9000's web-based setup page

The Linksys RE9000 MU-MIMO Range Extender is a tri-band ethernet bridge and a range

extender all-in-one. This article will show you how you can access the Linksys RE9000's web-based

setup page.

Step 1:

Connect a device to your range extender's Wi-Fi and launch a browser once connected.

Step 2:

Do one of the following methods to log in to the Linksys RE9000's web-based setup page:



Enter "http://extender.linksys.com" in the Address bar.



Enter "http://RE9000" (for Windows® users) in the Address bar

NOTE: If you changed your Linksys RE9000's name, then you will need to use the custom name

(e.g., http://MyAP).



Enter "http://RE9000.local" (for Mac® users) in the Address bar.

NOTE: If you changed your Linksys RE9000 name, then you will need to use the custom name

(e.g., http://MyAP.local).



Enter the Linksys RE9000's IP address.

NOTE: If the Linksys RE9000 does not detect a DHCP server, the default IP address

is 192.168.1.1. Otherwise, you will need to look up your range extender's IP address in the DHCP

table. To know how to do this using a Linksys Wi-Fi Router, click

Smart Wi-Fi Router, click

QUICK TIP: Some options may not be available in Access Point mode due to the design and

functionality as an access point.

Step 3:

You will be prompted for an administrative Password. If you have changed your password, enter

your customized password. Otherwise, enter the default "admin" in the field then click Login.

here.

If you are using a Linksys