Advertisement
When on Range Extender mode, the Linksys RE9000's top header will read Next-Gen AC Wireless
Range Extender.
Setting up the Linksys RE9000 to Access Point mode
The Linksys RE9000 MU-MIMO Range Extender can be set up in two ways, through Range
Extender mode or Access Point mode. This article will show you the steps on how you can set it
up on Access Point mode.
Before you begin, make sure to have the following:
A wireless computer MUST be used
Have an ethernet cable ready
Make sure no other devices are hardwired to the Linksys RE9000
Advertisement
