XP-ZV700/ZV701/ZV702
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. CABINET (UPPER) ASSY , CABINET (LOWER)
3-3. JACK BOARD, OPTICAL PICK-UP ASSY (CDM-3325ERV)
Note: Follow the disassembly procedure in the numerical order given.
3-2. CABINET (UPPER) ASSY, CABINET (LOWER)
2 four screws
5 flexible flat (12 core) cable
(CN601)
6 cabinet (upper) assy
3 two claws
6
SECTION 3
DISASSEMBLY
SET
(Page 6)
(Page 7)
2 two screws
4 cabinet (lower)
3-4. SWITCH BOARD
(Page 7)
3 two claws
1 Open the upper lid.
S501
Note: On installation of JACK board,
adjust the position of switch (S501)
and knob (hold).
knob (hold)
3 two claws