Table of Contents
Advertisement
2
Bluetooth
Pair SE888 with your mobile phones
Make sure the Bluetooth function of the mobile phones
is activated and in searching status. Then you can do the
pairing in this way:
1 On the base station, press MENU.
2 Select [Bluetooth] > [Find Me].
3 Place the mobile phone close to the base station, then
press [OK] to confirm.
4 On the mobile phone, select SE888 and connect.
5 Enter the PIN code (0000) on the mobile phone if
necessary.
» When SE888 and the mobile phone are paired,
or
is displayed on the screen of the handset
and base station.
Note
• When the Bluetooth device list is full, remove some
mobile phone names before pairing can start.
• If the name of SE888 exists in your mobile phone, you
have to remove it from your mobile phone. Then you
can do the pairing again.
Tip
For PC pairing and PC phonebook download, install
the PC software 'ThinkLink' saved in the cd rom or at
http://www.philips.com/support
Advertisement
Table of Contents
