Change The Default Administrator Password; Enter The License Keys For Each Service; Using Quick Configuration To Set Up Email Management - SonicWALL Email Security 800 Getting Started Manual

Change the Default Administrator Password

1. Login to the SonicWALL Email Security appliance using the IP address you entered
in "Hostname and Networking" on page 14.
The Server Configuration > License Management page displays.
2. Enter a new management password into the Password field.
3. Enter it again in the Confirm Password field.
4. Click Apply Changes.

Enter the License Keys for Each Service

1. Retrieve the license keys you recorded in "Activating SonicWALL Email Protection
Services" on page 9. Enter each license key for a service in the License Key field.
2. Click the Add License Key button.
3. Repeat this step for each license key. The Module table will display the licensing
status of each service you enter a key for.

Using Quick Configuration to Set Up Email Management

The Quick Configuration page will walk you step-by-step through the configuration of
your SonicWALL Email Security appliance. Use this window the first time you configure
SonicWALL Email Security if you are installing SonicWALL Email Security as an All-In-
One server and have only one downstream server. More options for these settings are
available in the other Server Configuration pages.
Click
Server Configuration > License Management page to launch the Quick
Configuration page.
Page 18
at the bottom of the