18� Always ensure that the power supply unit is
•
in a safe operating condition and easily accessible,
•
properly plugged into the wall socket,
•
only operated within the permissible temperature range,
•
not covered or exposed to direct sunlight for longer periods of time in order
to prevent heat accumulation�
Intended use
•
The product is designed for indoor use�
•
The product can be used for commercial purposes�
•
It is considered improper use when the product is used for any application
not named in the corresponding instruction manual�
•
Sennheiser does not accept liability for damage arising from improper use
or misuse of this product and its attachments/accessories�
•
Before putting the products into operation, please observe the respective
country-specific regulations!
•
Sennheiser is not liable for damages resulting from the loss of connection
due to flat or overaged (rechargeable) batteries or exceeding the transmis-
sion range�
•
Sennheiser does not accept liability for damage arising from abuse or mis-
use of this product and its attachments/accessories�
Active Transmitter Combiner 8:1 AC 3200-II
With the AC 3200-II active transmitter combiner, the signals of up to eight
Sennheiser wireless monitoring transmitters can be combined onto a single an-
tenna, e�g� the A 2003 UHF directional antenna, the A 1031 U omni-directional
antenna or the A 5000 CP circularly polarized UHF antenna� For suitable trans-
mitters, please refer to the AC 3200-II product page at www�sennheiser�com�
The AC 3200-II allows you to make high-quality 8-channel transmission sys-
tems suitable for the following areas of application:
•
Multi-channel monitoring systems for stage use
•
Multi-channel systems suitable for any application where talk-back signals
are to be transmitted (e�g� studio)�
Important safety instructions
AC 3200-II | 19