Timed Run Feature - InSinkErator PowerRinse PRP Series Installation, Care And Use Manual

MAIN OPERATION (cont.)

TIMED RUN FEATURE

The PowerRinse Waste Collection System has a built-
®
in shut off timer in the control. The timer is preset for 20
minutes from factory. After the set time elapses, the unit
will shut off.
To turn timed run ON or OFF:
1
2
Open the control panel. Locate the Timer ON and OFF
switch.
2
Timer ON
Position
Move switch to desired position.
Operating Instructions
To adjust timer:
1
Open the control panel. Locate the Timer Switch.
2
Timer ON and
OFF Switch
Rotate time range switch or main dial to desired
settings (as shown). The time range switch sets the
increments (0.1s, 1s, 10s, etc.) and the main dial is the
"multiplier." The factory default is 10m on time range
Timer OFF
Position
switch and 2 on the main dial, or 20 minutes.
12
Timer
Switch
2
Time
Range
Switch
Timer
Switch
Main Dial