Installing A Sff Drive Carrier Module; Installing A Sff Drive Carrier Module (1 Of 2) - Seagate 5005 Series Hardware Installation And Maintenance Manual

Installing a SFF drive carrier module

1. If the anti-tamper lock is engaged, unlock it per the instructions provided in "Using the anti-tamper locks" (page 113).
2. Release the carrier handle by pressing the latch in the handle downwards, and opening the hinged handle as shown
in Figure 84 (page 115). Insert the carrier into the enclosure in a vertical position.
IMPORTANT: Make sure the carrier is positioned such that the disk is on its left side and the handle opens from the top.
Figure 84 SFF drive carrier module in open position
3. Slide the carrier fully into the enclosure until it is stopped by the camming lever on the bottom of the carrier.
Figure 85 Installing a SFF drive carrier module (1 of 2)
Replacing a drive carrier module 115