Table of Contents
Advertisement
Chapter 13
company's server. Now I have a switch and another router. I connect the devices as
shown in the following figure so that the physical connection between my PC and my
company's server is achieved. To surf the internet and visit my company's network at
the same time, I need to configure the static routing.
How can I do that?
1. Make sure the routers use different LAN IP addresses on the same subnet. Disable
Router 2's DHCP function.
2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
3. Go to
Advanced
>
click Save.
4. Click
Add
to add a new static routing entry. Finish the settings according to the
following explanations:
Modem router
LAN: 192.168.1.1
Switch
192.168.1.100
Network
>
Static
Routing. Select your current
Specify Your Network Settings
Company's server
Router 2
WAN: 172.30.30.100
LAN: 192.168.1.2
172.30.30.1
My PC
WAN Interface
and
94
Hide quick links:
Advertisement
Table of Contents
