Table of Contents
Advertisement
Device Configuration
4. Configure PPC3-EVM-MB as described in
•
USB control for I
•
USB control for I2S
2
•
3.3 V I
C
•
3.3 V I2S
•
1.8 V IOVDD
5. Connect a 5V supply to connector J12 or J11 on PPC3-EVM-MB
6. Connect a Micro USB Cable from PC to PPC3-EVM-MB
8
TAS2563YBGEVM-DC Evaluation module
Figure 7. Stereo Setup
2
C
Copyright © 2019, Texas Instruments Incorporated
www.ti.com
SLAU800 – January 2019
Submit Documentation Feedback
Advertisement
Table of Contents
