Honda CRF1000 Africa Twin Manual page 322

20190704203539_32MKS6000_eng_BOOK Page 322 Thursday, July 04 2019 20:57:26 JST
Make sure that the slot on the brake
2.
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Adjust the drive chain.
3.
Install and tighten the rear axle nut.
4.
Torque: 100 N·m (10.2 kgf·m, 74 lbf·ft).
Lug
Slot
Swingarm
P. 274
2
Tyre Puncture
Install the chain cover and tighten bolts.
5.
After installing the wheel, apply the brake
6.
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Removing Wheels
u
317