Honda CRF1000 Africa Twin Manual page 270

20190704203539_32MKS6000_eng_BOOK Page 270 Thursday, July 04 2019 20:57:26 JST
Install the new clutch oil filter with the
3.
rubber seal facing in, toward the engine.
You will see "OUT-SIDE" mark on the
clutch oil filter body, toward the filter
cover.
Replace the O-ring and apply a thin coat
4.
of engine oil to the new O-ring when
before installing it.
Install the spring and the clutch oil filter
5.
cover.
Install the clutch oil filter cover bolts and
6.
tighten.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Apply a thin coat of engine oil to the
7.
rubber seal of a new engine oil filter.
P. 263
2
Install a new engine oil filter and tighten.
8.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Engine Oil Changing Clutch Oil Filter
u
Install a new sealing washers onto the
9.
drain bolts. Tighten the drain bolts.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Fill the crankcase with the recommended
10.
oil ( P. 241, P. 363) and install the oil fill
2 2
cap.
Required oil
When changing oil, engine oil filter
& clutch oil filter:
4.2 L (4.4 US qt, 3.7 Imp qt)
Check the oil level. P. 260
11.
2
Check that there are no oil leaks.
12.
Install the skid plate.
13.
2
P. 257
265