Honda CRF1000 Africa Twin Manual page 138

20190704203539_32MKS6000_eng_BOOK Page 138 Thursday, July 04 2019 20:57:26 JST
Honda selectable torque control
Torque Control level (engine power control)
can be selected or turned on/off.
Do not change the Torque Control level
u
while riding.
Stop the vehicle first, turn the Torque
Control off or on and select the desired
level.
The Torque Control setting cannot be
u
changed or turned off when the system is
activated (Torque Control indicator flashing).
In the following cases, the Torque Control
u
will be turned on and the specific Torque
Control level will automatically be set as
below.
• Each time the ignition switch is turned
to the (On) position, the Torque
Control level will automatically be set
to level it was set to. However, if the
level was set to [0] (off), it will become
level 1.
When the Torque Control is turned from the
u
[0] (off) position to the on position, it will
automatically be set to level of before
turning off the Torque Control.
Continued
133