Plug In Refrigerator; Move Refrigerator To Final Location; Level And Align Refrigerator - Jenn-Air Euro-Style Design JS42SSDUDE Installation Instructions Manual

PLUG IN REFRIGERATOR

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similar
qualified person. Do not use a cord that shows cracks or
abrasion damage along its length or at either the plug or
connection end.
1.
Set control switch at top of cabinet to the OFF
position.
2.
Plug into a grounded 3 prong outlet.
MOVE REFRIGERATOR TO FINAL
LOCATION
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT: To avoid floor damage, make sure levelers
are raised (not touching floor) and refrigerator is on rollers
before moving.
1.
Place top of cardboard carton or plywood under
refrigerator. Remove dolly.
2.
Do not remove film or cover.
3.
Move the refrigerator straight back and evenly into
the opening. Be sure that the refrigerator side trims
are not interfering with the door opening. Also, be
sure that the water tubing is not kinked and the
power supply cord is on top of the refrigerator.
14

LEVEL AND ALIGN REFRIGERATOR

WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT: All four leveling legs must contact the floor
to support and stabilize the full weight of refrigerator.
Rollers are for moving the refrigerator, not for permanent
support.
After moving the refrigerator to its final location:
Use a 5/16" socket driver to turn the leveling bolts
clockwise to extend the legs to the floor as shown.
The rollers should be off the floor.
A
B
A. Rear leveling bolt
B. Front leveling bolt
4.
Adjust the leveling legs to level and align the
refrigerator from left to right and front to back so
that the refrigerator is level and aligned with the
cabinetry. The cabinetry surface must be plumb for
the ideal fit of the refrigerator side trim.
A
B