Cleaning The Printhead - Intermec EasyCoder E4 User Manual

Cleaning the Printhead

1
1
Open the side and front covers.
Intermec EasyCoder E4 – User's Guide
It is important to clean the printhead regularly, preferably each
time you load a new roll of media.
Use the special cleaning card to clean the printhead. Always
dispose of the used cleaning card properly.
Isopropyl alcohol [(CH
fl ammable, moderately toxic, and mildly irritating substance.
2
Chapter 6
Warning!
) CHOH; CAS 67-63-0] is a highly
3 2
2
Raise the printhead.
Maintenance
39