Concurrent Rps And Ac Inputs Failure; Fan Tray Failure; Symptom - H3C S5110V2 Series Installation Manual

Verify that the operating temperature of the switch is in the acceptable range, and the power
3.
module has good ventilation. Over-temperature can cause the power module to stop working
and enter the protection state.
If the issue persists, contact H3C Support.
4.

Concurrent RPS and AC inputs failure

Symptom 1

The system status LED is off.
Solution
To resolve the issue:
Verify that the AC power cord is securely connected to the switch, and the AC-input power
1.
receptacle on the switch and the connected AC power outlet are in good condition.
Verify that the AC power source is operating correctly.
2.
Verify that the switch is securely connected to the RPS.
3.
Verify that the RPS is operating correctly.
4.
Verify that the operating temperature of the switch is in the acceptable range, and the power
5.
module has good ventilation. Over-temperature can cause the power module to stop working
and enter the protection state.
If the issue persists, contact H3C Support.
6.
Symptom 2
The system status LED is on but the RPS status LED is steady yellow.
Solution
To resolve the issue:
Verify that the AC power cord is securely connected to the switch, and the AC-input power
1.
receptacle on the switch and the connected AC power outlet are in good condition.
Verify that the AC power source is operating correctly.
2.
If the issue persists, contact H3C Support.
3.
Symptom 3
The system status LED is on but the RPS status LED is off.
Solution
To resolve the issue:
Verify that the switch is securely connected to the RPS.
1.
Verify that the RPS is operating correctly.
2.
If the issue persists, contact H3C Support.
3.

Fan tray failure

Symptom
The system status LED on the switch indicates a fan tray failure.
21