Concurrent Rps And Ac Inputs Failure; Removable Power Module Failure - H3C S5130S-EI series Installation Manual

Hide thumbs Also See for S5130S-EI series:
Table of Contents

Advertisement

Verify that the operating temperature of the switch is in the acceptable range, and the power
3.
module has good ventilation. Over-temperature can cause the power module to stop working
and enter the protection state.
If the issue persists, contact H3C Support.
4.

Concurrent RPS and AC inputs failure

Symptom 1
The system status LED is off.
Solution
To resolve the issue:
Verify that the AC power cord is securely connected to the switch, and the AC-input power
1.
receptacle on the switch and the connected AC power outlet are in good condition.
Verify that the AC power source is operating correctly.
2.
Verify that the switch is securely connected to the RPS.
3.
Verify that the RPS is operating correctly.
4.
Verify that the operating temperature of the switch is in the acceptable range, and the power
5.
module has good ventilation. Over-temperature can cause the power module to stop working
and enter the protection state.
If the issue persists, contact H3C Support.
6.
Symptom 2
The system status LED is on but the RPS status LED is steady yellow.
Solution
To resolve the issue:
Verify that the AC power cord is securely connected to the switch, and the AC-input power
1.
receptacle on the switch and the connected AC power outlet are in good condition.
Verify that the AC power source is operating correctly.
2.
If the issue persists, contact H3C Support.
3.
Symptom 3
The system status LED is on but the RPS status LED is off.
Solution
To resolve the issue:
Verify that the switch is securely connected to the RPS.
1.
Verify that the RPS is operating correctly.
2.
If the issue persists, contact H3C Support.
3.

Removable power module failure

The S5130S-28F-EI and S5130S-52F-EI switches use removable power modules. You can
determine the power module operating status by examining the power module LEDs PWR1 and
PWR2 on the switch front panel. For descriptions about the PWR1 and PWR2 LEDs, see
C Ports and
LEDs."
33
"Appendix

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents