im Vertrieb von
www.camboard.de
CAMBOARD Electronics
• A standard wipe causes the preview image to appear to unroll over the
program image horizontally or vertically. A standard wipe can have either
hard (sharp) or soft (fuzzy) edges. The preview image can have the
following transitions (figure 3-32):
•
From left to right
•
From right to left
•
From top to bottom
•
From bottom to top
left to right
Figure 3-32 — Standard wipe transitions
• A curtain wipe causes the preview image to appear to unroll over the program
image in two directions simultaneously. A curtain wipe can have either
hard (sharp) or soft (fuzzy) edges. The preview image can have the
following transitions (figure 3-33):
•
In from the left and right edges of the screen to the center of the screen
•
Out from the center of the screen to the left and right edges of the screen
•
In from the top and bottom edges of the screen to the center of the
screen
•
Out from the center of the screen to the top and bottom edges of the
screen.
Figure 3-33 — Curtain wipe effects
• A plus wipe causes the preview image to appear to unroll over the program
image in one of two transitions (figure 3-34):
•
Starting in all four corner of the screen and moving in to the center of
the screen.
•
Starting at the center of the screen and moving out to the corners of the
screen.
Figure 3-34 — Plus wipe effects
Tel. 07131 911201
Fax 07131 911203
right to left
top to bottom
ce-info@camboard.de
SGS 408 Switcher • Operation
bottom to top
3-17