Preparing Hot Water; Changing Basic Settings; Service Mode 1; Setting Auto Off - Melitta Avanza Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31

Changing basic settings

5.7 Preparing hot water

You prepare hot water on the Cappucci-
natore.
CAUTION
Hot water and hot steam flowing out of
the pipe
Do not reach into the hot water that is
ƒ
flowing out.
Do not touch the steam pipe during
ƒ
and immediately after use. Wait until
the steam pipe has cooled down.
Requirement: The appliance is ready for
operation. The Cappuccinatore is con-
nected.
1. Place a vessel beneath the Cappucci-
natore.
2.
Open the "valve".
»
Beverage dispensing starts.
3.
Close the "valve".
»
Beverage dispensing stops.
4. Remove the vessel.
6
Changing basic settings
You can change the basic settings of the
appliance with several functions. The func-
tions are divided into two service modes.

6.1 Service mode 1

Each function is assigned a display.
Service mode 1
Display
function
Auto OFF
Water hardness
Switch-off rinsing
Filter programme
Cleaning programme
44
Service mode 1
Display
function
Descaling programme
Brewing temperature
To call up Service mode 1, proceed as
follows:
Requirement: The appliance is ready for
operation.
Press the "Service" button for
1.
  
more than 2 seconds to call up Service
mode 1.
The Ready display flashes rap-
»
  
  
idly and the 2 cups button lights up.
Press the "Service" button one or
2.
  
more times to access the desired
function.
»
A display lights up according to the
function selected, see Service mode 1
table.
»
The number of lit bean symbols
indicates the current setting of the
function.
Press the "Coffee" direct key to exit the
service mode without saving the settings.
Information
If no further input is made within 1 min-
ute, the appliance returns to Ready mode.

6.2 Setting Auto OFF

If you do not operate the machine for a
long time, it initially switches to energy
save mode. After a further preset time, the
appliance switches off.
The following settings are possible:
Display
Energy save
mode after:
3 minutes
10 minutes
  
20 minutes
     
Switch off after:
30 minutes
1 hour
4 hours

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents