Alpine INE-W970HD Quick Reference Manual page 26

G) SiriusXM Tuner Input Connector
To SiriusXM Tuner.
®
Radio Antenna Receptacle
®
Speed Sensor Lead (Green/White)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
©
Rear Camera Input Connector (RCA)
@ Front or Side Camera Input Connector (RCA)
®
AUX Input Connector
Input lead for AUX video/audio signal.
(J)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote tum-on lead of your amplifier
or signal processor.
@ Reverse Lead (Orange/White)
Connect to the plus side of the car's reverse lights. These
lights illuminate when the transmission is shifted into reverse
(R).
With this lead properly wired, the video picture automatically
switches to the rear camera whenever the car is put into
reverse (R).
®
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle's
power antenna. Do not use this lead to tum on an amplifier
or a signal processor, etc.
@)
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of parking brake
switch to transmit the parking brake status signals to the
unit.
6-EN
®
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source that provides (+)
12V only when the ignition is turned on or in the accessory
position.
@
Fuse Holder (15A)
(@ Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
®
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely
fastened using the sheet metal screw provided.
@)
Left Rear(+) Speaker Output Lead (Green)
(@ Left Rear (-) Speaker Output Lead (Green/
Black)
@ Left Front(+) Speaker Output Lead (White)
@) Left Front (-) Speaker Output Lead (White/
Black)
@)
Right Front (-) Speaker Output Lead (Gray/
Black)
®
Right Front(+) Speaker Output Lead (Gray)
®
Right Rear (-) Speaker Output Lead (Violet/
Black)
@ Right Rear
(+)
Speaker Output Lead (Violet)
@
Remote Control Output Lead (Gray) (For Rear
Monitor)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
@ Remote Control Input Lead (Gray)
Connect the external Alpine product to the remote control
output lead.