Operation; Control Panel Operation; Control Options; Programming - Chauvet Ovation P-56WW User Manual

Table of Contents

Advertisement

O
PERATION

4. Operation

Control Panel Operation

Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current
function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function

Control Options

Set the Ovation P-56WW starting address in the 001–512 DMX range. This enables control of up to 85
products in the 6-channel 6 Ch personality.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
Press <MENU> repeatedly to exit to the previous main level.

Menu Map

Main Level
DMX
Address
DMX
Channel
Dimmer
Static
Strobe
Auto 1
Auto Show
Auto 2
Auto 3
Master/Slave
Dimmer
Curve
Dimmer
Mode
LED
Frequency
Ovation P-56WW User Manual Rev. 4
Programming Levels
001–512*
1 Ch
2 Ch
3 Ch
6 Ch
<000–255>
001-100
Master
Slave
Linear
Square
I Square
SCurve
Off
Dimmer 1–3
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Description
Selects DMX address (highest channel
restricted to personality chosen)
1-channel: dimmer
2-channel: 16-bit dimmer, dimmer
3-channel: 16-bit dimmer, dimmer, strobe
6-channel: 16-bit dimmer, dimmer, strobe,
auto programs, auto speed, dimmer speed
Controls intensity
Controls strobe rate
Selects automatic programs and auto
program speed
DMX mode (Master)
Slave mode
Sets the dimmer curve
Linear dimmer
Dimming curves Dimmer 1 (fast) to
Dimmer 3 (slow)
Sets the PWM frequency
Page 9 of 18

Advertisement

Table of Contents
loading

Table of Contents