Important Notes; Operation; Lcd Display - Siemens POLYCOOL RWR470.10 Basic Documentation

Field of Use
Electrical Installation
Commissioning

Operation

Wiring
Storage and Transport
Maintenance
Faults
Disposal
Siemens Building Technologies
HVAC Products
• Strict user privilege control
• Multiple applications can be configured by setting parameters
• Control of inlet/outlet water/water temperature
• Fast application (with parameters) uploading and downloading via PolyStick
• Complete alarm and warning management
• User-friendly icon HMI, LCD display and light blue backlight

Important Notes

This symbol draws your attention to special safety notes and warnings. If such notes
are not observed, personal injury and / or considerable damage to property can occur.
RWR470.10 controller may only be used for the control and supervision of heating,
ventilation, air conditioning and chiller plant.
Prerequisites for flawless and safe operation of RWR470.10 controller are proper
transport, installation, commissioning, and correct operation.
Fuses, switches, wiring and earthing must be in compliance with local safety
regulations for electrical installations.
Preparation for use of commission of RWR470.10 controller must be undertaken by
qualified staff who have been appropriately trained by Siemens Building Technologies.
RWR470.10 controller may only be operated by staffs who have been instructed by
Siemens Building Technologies or their delegates and whose attention has been drawn
to potential risks.
When wiring the system, the AC 240V section must be strictly segregated from the AC
24V safety extra low-voltage (SELV) section in order to ensure protection against
electric shock hazard!!
For storage and transport, the limit values given in the relevant Datasheet must be
always be observed.
System sections accommodated in the control panel should be freed from dust and dirt
whenever normal service visits are due.
Should system faults occur and you are not authorized to make diagnostics and to
rectify faults, call your service staff of Siemens Building Technologies.
Only authorized staffs are permitted to make diagnostics, to rectify faults and to restart
the plant. This also applies to work carried out within the control panel (e.g. safety
checks or changing fuses).
The products contain electrical and electronic components and may not be disposed of
as household waste.
Local and currently legislation must be complied with!
SIEMENS Controller
2/28
HEAT PUMP controller
27.11.2006