Tascam CD-400U DAB Owner's Manual page 14

2 – Names and Functions of Parts
8 [FM MODE] button
a
i Press to input track number 8 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is FM, and shift mode is active
(SHIFT indicator lit), press to switch between stereo and
mono for FM broadcast reception. (see "Setting the FM
mode" on page 34)
9 [P.AREA] button
s
i Press to input track number 9 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is USB or SD and shift mode is ac-
tive (SHIFT indicator lit), press to set the play area. (see "Set-
ting the playback area" on page 24)
0 [DUB] button and indicator
d
i Press to input track number 0 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 25)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is CD and playback is stopped or
the current source is DAB/FM, press with shift mode active
(SHIFT indicator lit) to start dubbing (copying) preparation.
The indicator lights when the dubbing (copying) function is
active. (see "Dubbing procedures" on page 38)
CLEAR button
f
i When the current source is CD, USB or SD, press this to clear
values input with number buttons.
i Press to close a warning message that has appeared on the
Home Screen.
i When the current source is FM, press and hold to clear all
preset stations for that source. (see "Clearing preset assign-
ments" on page 35)
SHIFT button and indicator
g
Press this button to light the indicator and enable shift mode,
which activates the shift functions of other buttons. (These
functions are shown below the buttons with white letters on
dark blue backgrounds.)
To deactivate the shift mode (SHIFT indicator unlit), press the
SHIFT button again.
SOURCE button
h
Press to switch the current source. (see "Selecting the play-
back source" on page 22)
14
TASCAM CD-400U DAB
DISPLAY/RDS/INFO button
j
i Press during playback to show a variety of information. (see
"Time and text information display" on page 30)
i Press when the current source is FM to switch the RDS mode.
(see "RDS (European model only)" on page 36)
i When the input source is DAB, press to start automatic sta-
tion selection.
BACK [PAIRING] button
k
i When the Menu screen is open, press to return to the Home
Screen.
i When a Menu setting screen is open, press to go up one
menu level.
i When the current source is USB or SD and the play area is
folder ( icon shown), press to move up one folder level.
(see "Playback area" on page 24)
i When the current source is BLUETOOTH, press and hold to
activate Bluetooth pairing mode. When a Bluetooth con-
nection is active (Connected shown), press to disconnect
forcefully. (see "Pairing" on page 31)
SD card slot
l
Insert SD cards in these slots. (see "Inserting and removing SD
cards" on page 21)
USB port
;
Connect (and disconnect) USB flash drives here. (see "Con-
necting and disconnecting USB flash drives" on page 22)