Table of Contents
Advertisement
1
Lock the right end of the front bezel to the rack handle (see letter "A" in Figure).
Figure 1: Attaching the Optional Front Bezel
2 Rotate the front bezel clockwise until the left end clicks into place (see letter "B" in Figure).
3 Lock the bezel if needed.
Connecting to a Power Source
1
Attach the power cord bracket and nylon cable clamp tie:
1
Using the two nuts shipped with the bracket, attach the bracket to the chassis tab to the right of
Power Supply 2.
2 Push the arrowhead end of the cable clamp tie into the hole in the bracket to anchor the tie.
Figure 2: E2120 Back Panel Layout
Item
1
2
3
4
5
6
ExtremeCloud™ Appliance E2120
Description
Power Supply Module #1
Mgmt Port, 1 GbE RJ45 (Admin)
Port 2 (not used, plugged)
Video Connector
RJ45 Serial-A Port
USB 2.0/3.0 Ports
Hardware Installation
6
Advertisement
Table of Contents
