Safety Instructions - Bostitch BT1855 Original Instructions Manual

GB ©Stanley Bostitch. Not to be reproduced without permission. Unauthorised copies of this
document do not constitute CE compliance for the products.

SAFETY INSTRUCTIONS

F ©Stanley Bostitch. Reproduction interdite sans permission préalable. Les copies non autorisées
m IMPORTANT READ CAREFULLY: It is important that all operators read and understand all sections
de ce document ne signifient en rien que les produits soient conformes aux normes CE.
of this Tool Technical Data manual and the separate Safety and Operating Instruction Manual which
come with this tool. Failure to do so could result in you or others in the working area to be seriously
D ©Stanley Bostitch. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte
injured.
Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
m WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined in
EN166 should be used. However all aspects of operators work, environment and other type/s of machinery being
NL ©Stanley Bostitch. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige
used, should also be considered when selecting any personal protection equipment. Note: Non-side shielded
kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
spectacles and face shields alone do not provide adequate protection.
m WARNING! To prevent accidental injuries:
DK ©Stanley Bostitch. Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument
• Never place a hand or any other part of the body in fastener discharge area of tool.
udgør ikke CE overholdelse for produkterne.
• Never point tool at yourself or anyone whether it contains fasteners or not.
• Never engage in horseplay.
SF ©Stanley Bostitch. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt
• Never pull the trigger unless the nose is directed towards the work.
• Always handle the tool with care.
kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.
• Use the Bostitch tool only for the purpose for which it was designed, such as: the finishing around doors,
windows and edging; draw bottoms, cabinet backs and cabinet making; picture framing and furniture trim.
G ©Stanley Bostitch. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη
These tools should not be used for anything other than wood to wood applications.
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
• Do not pull the trigger or depress the work safety yoke whilst loading the tool.
τα προϊόντα.
• To prevent accidental actuation and possible injury, always disconnect air supply.
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in use.
I ©Stanley Bostitch. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
documento non garantiscono la conformità CE per i relativi prodotti.
• Read the additional Safety & Operating instructions booklet before using tool.
• Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
• The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and gases.
N ©Stanley Bostitch. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
dokumentet oppfyller ikke kravene for CE-merking for produktet.
LOADING
P ©Stanley Bostitch. Reprodução proibida sem autorização prévia. As cópias não autorizadas
m Warning! When loading the tool 1) Never place a hand or any part of the body in fastener discharge area
of the tool; 2) Never point the tool at self or anyone else; 3) Do not pull the trigger or depress the safety yoke as
deste documento não estão em conformidade com a CE para os produtos.
accidental actuation may occur, possibly causing injury.
E ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
1. Depress magazine release button and pull back magazine. (Fig 1)
documento no suponen la conformidad con las normas CE de los productos.
BT1855, BT1855SP
2. With magazine fully open, insert fasteners. Points must be against bottom of magazine. (Fig 2)
FN1650, FN1650SP
(Figs 1-3)
3. Push magazine forward. Continue pushing until latch is engaged. (Fig 3)
S ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
1. Depress magazine release button and pull back magazine. (Fig 4)
documento no suponen la conformidad con las normas CE de los productos.
SX1838
2. Open magazine fully. Turn tool sideways with discharge area pointed away from yourself
SL540
PL ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
(Figs 4-6)
3. Push magazine forward. Continue pushing until latch is engaged. (Fig 6)
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
1. Load nails through the slot in the rear of the magazine and past retaining clip. (Fig 7)
prezentowanych produktów.
FN1664
2. Pull pusher back behind nail stick and release. (Fig 8)
FN1664SP
3. Ensure magazine pusher is behind the last nail stick. (Fig 9)
(Figs 7-9)
CZ ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
FASTENER LOCK OUT (BT1855, FN1664, SX1838)
prezentowanych produktów.
These tools employ a mechanism to prevent dry firing of the tool. When the magazine is not loaded with nails or
when the remaining number of nails becomes less than ≈10, the contact arm cannot operate and the tool will not
SK ©Stanley Bostitch. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
fire.
dokumentu nie sú v súlade s CE pre dané výrobky.
HU ©Stanley Bostitch. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
& others. Load staples in channel. (Fig 5)
GB