Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual page 38

A200/A100 Hardware
Using the Flash Output Sync Signal Correctly
− The flash's common wire uses a specialized terminal. Do not use it together with
another common wire.
− You cannot use the same strobe for multiple cameras connected to separate
controllers.
− When a strobe is used, the strobe flashes continuously during through screen
display. Therefore, change to memory image display when connecting, setting up,
and testing a strobe.
Input/Output Terminals (Input/Output Ports)
3.5 Flash Output Sync Signal
3 − 9